Table of Contents
Advertisement
Model 7002-HD User's Manual
Table 5-3 (cont.)
ROUTe command summary
Command
:MEMory
:SAVE
[:RELays] M<num>
:LIST <list>, M<num>
:RECall M<num>
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to be
included in the program message. Do not use brackets ([ ]) in the program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the program
message.
3. Upper case characters indicate the short-form version for each command word.
4. At least on space is required between a command word and the parameters.
Sense subsystems
The sense subsystems are used to read the inputs of digital cards installed in
slots 1 through 10,
Table 5-4
SENSe command summary
Command
:SENSeX
:DATA? <list>
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters
do not have to be included in the program message. Do not use brackets ([ ]) in the
program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brack-
ets (< >) in the program message.
3. Upper case characters indicate the short-form version for each command word.
4. At least one space is required between a command word and the parameter.
Path to program memory:
Path to save channel patterns:
Save current channel pattern at specified memory
location (1 to 500).
Save defined channel pattern at specified memory
location (1 to 500).
Recall channel pattern from memory (1 to 500).
respectively.Table 5-4
Description
Specify slot; X=2 (slot 1) through 11 (slot 10).
Read specified input channels for the specified
slot.
Return to
Section 5 topics
IEEE-488 Operation 5-13
Description
lists commands
Advertisement
Table of Contents
