Entering Lists - Keithley 7002-HD User Manual

Model 7002-HD User's Manual

Entering lists

Perform the following steps to create a channel list or scan list using the front
panel keys:
Step 1: Make sure appropriate list is selected.
Open/close operations use the channel list, and scan operations use the scan list.
The SCAN LIST key toggles between the channel list and the scan list. If the
desired list is not already displayed, press SCAN LIST. Note that pressing EXIT
will also select the channel list.
Step 2: Enter slot number and card channel.
1.
2.
Step 3. Enter channel separator or terminator.
Channel separators are required for multiple channel entries, and a terminator
should be used after the last entered channel.
The comma (,) is used to separate channels and serves to terminate the list. After
entering a channel, as explained in Step 2, press the right cursor key or ENTER to
put in the comma separator. Another channel can then be keyed-in. After the last
channel in the list is keyed-in, use the ENTER key or the right cursor key to termi-
nate the list. The comma terminator prevents the last entered channel from being
cancelled when the left cursor key is pressed. The following example shows
proper format:
SELECT CHANNELS 1!1, 1!2, 1!3, 1!4, 1!5, 1!6, 1!7, 1!8, 1!9, 1!10, M1,
SCAN CHANNELS 1!1, 1!2, 1!3, 1!4, 1!5, 1!6, 1!7, 1!8, 1!9, 1!10, M1,
The above display indicates that channels 1!1 through 1!10 and the closed chan-
nels stored at memory location 1 (M1) are entered.
Enter slot number ⎯ Using the keypad, enter the slot number (1 through
10). The separator between slot and channel will automatically be entered
after you key in the slot number. For example, if you selected slot 2, the
entered channel data will look like one of these:
SELECT CHANNELS 2!
SCAN CHANNELS 2!
Enter card channel:
Use the keypad to enter the card channel number. For example, if you
entered channel 20 (with slot 2 previously selected), the entered channel
data will look like one of these:
SELECT CHANNELS 2!20
SCAN CHANNELS 2!20
At this point, the entered channel can be cancelled by pressing the left cur-
sor key.
Return to
Section 4 topics
Front Panel Operation 4-7