Table of Contents
Advertisement
1-2
General Information
Introduction
This section contains general information about the Model 7002-HD High Density
Switch System.
Features
Key features include:
•
•
•
•
•
•
Warranty information
Warranty information is located on the inside front cover of this manual. Should
your Model 7002-HD require warranty service, contact the Keithley representative
or authorized repair facility in your area for more information. When returning the
card for repair, be sure to fill out and include the service form at the back of this
manual in order to provide the repair facility with the necessary information.
Manual addenda
Any improvements or changes concerning the manual will be explained in an
addendum included with the instrument.
High Density Switching ⎯ Up to 400 channels (or matrix crosspoints) per
mainframe using only two switching cards in the CARD 1 and CARD 2 loca-
tions. (Slots 1 through 5 are mapped to CARD 1, and slots 6 through 10 are
mapped to CARD 2.)
Analog Backplane ⎯ Can be used to internally connect the rows or banks
of a Model 7002-HD series card installed in one slot to the rows or banks of
the Model 7002-HD series cards installed in the other slot.
Close/Open or Scan ⎯ The Model 7002-HD can close and/or open one or
more channels, or scan through a specified list of channels.
Memory ⎯ Up to 500 channel patterns (pattern of open and closed
channels) and 10 customized instrument setups can be saved in memory
for later recall.
IEEE-488 Bus ⎯ Bus operation conforms to the IEEE-488.2 and SCPI
standards.
Trigger Link ⎯ Trigger link provides more versatile and precise external
triggering.
Return to
Section 1 topics
Model 7002-HD User's Manual
Advertisement
Table of Contents
