Recalling Channel Patterns - Keithley 7002-HD User Manual

Model 7002-HD User's Manual
4.
5.
6.

Recalling channel patterns

Using RECALL
Perform the following steps to use RECALL:
1.
2.
3.
CAUTION
Using channel list and/or scan list
A channel pattern can be recalled by specifying the memory location in a channel
list and/or scan list. For example, assume a channel pattern that has Channels
2!11 and 2!36 closed is stored at memory location M10. Also assume that M10 is
included in the following channel list:
SELECT CHANNELS 1!1, 1!4, M10,
With the cursor on the appropriate selection, press ENTER. One of the fol-
lowing typical messages will be displayed:
STORE CHANS AT #001 or STORE LIST AT #001
Both messages indicate that storage will occur at memory location 1 (M1).
Note that you can cancel the store operation at this time by using the EXIT
key to back out of the menu structure.
If you wish storage to occur at the displayed memory location proceed to
step 6. Otherwise, use the cursor keys and the numeric keypad to key in the
desired memory location (001 to 500).
To store the channel pattern or list at the displayed memory location, press
ENTER.
Press RECALL to display the following typical message:
RECALL CHANS AT #001
The above message indicates that the channel pattern will be recalled from
memory location M1. You can exit from the Recall mode without recalling
the channel pattern by pressing EXIT. The instrument will return to the
channel list display state.
If you wish to recall the channel pattern from the displayed memory loca-
tion, proceed to step 3. Otherwise, use the cursor keys and the number
keys to key in the desired memory location (001 to 500).
To recall the channel pattern from the displayed memory location, press
ENTER. The instrument will return to the channel status display state and
display the recalled channel pattern.
As soon as the display updates to the selected channel pat-
tern, the corresponding relays on the cards will also update.
Thus, make sure you want to energize the card relays before
recalling a channel pattern.
Return to
Section 4 topics
Front Panel Operation 4-19