Table of Contents
Advertisement
Model 7002-HD User's Manual
Channel assignments
The Model 7002-HD uses five slot designations for control of all relays. To control
the appropriate relay, the slot number must be included with the channel number
when you specify a channel. The channel assignment is formatted as follows:
S!CH
where:
Examples:
1!1
5!10
NOTE The specific channel mapping will depend on the particular card
being used. Consult the card manual for details.
Card 1
When a card is used in the Card 1 position of the Model 7002-HD, it will be con-
trolled using slots 1 through 5.
Card 2
When a card is used in the Card 2 position of the Model 7002-HD, it will be con-
trolled using slots 6 through 10.
S is the slot number
CH is the channel number
= Slot 1, Channel 1
= Slot 5, Channel 10
Return to
Section 3 topics
Getting Started
3-5
Advertisement
Table of Contents
