Table of Contents
Advertisement
A-2
Specifications
7002-HD High Density Switch System
SYSTEM
EXPANSION: Two plug-in cards per mainframe.
CARD COMPATIBILITY: Compatible with 7002-HD-MTX1 and 7002-HD-
MUX1 cards.
MEMORY: Battery backed-up storage for 500 channel patterns.
SWITCH SETTLING TIME: Automatically selected by the mainframe.
Additional time from 0 to 99999.999 seconds can be added in 1ms increments.
INPUT TRIGGER SOURCES:
IEEE-488 bus (GET, *TRG).
Trigger Link (external trigger).
Manual (front panel).
Internal Timer, programmable from 1ms to 99999.999 seconds in 1ms
increments.
CHANNEL READY OUTPUT: Trigger Link.
SWITCHING SEQUENCE: Break-before-make [On (Default) / Off].
ANALOG BACKPLANE
SIGNALS: 32 single pole paths. These signals provide matrix and multiplexer
expansion between cards within one mainframe.
THROUGHPUT
EXECUTION SPEED OF SCANLIST
Individual Channels
7002-HD
External
Cards
Trigger Rate
MTX1
<128/s
MUX1
<128/s
1
:
Channel Patterns
External
External
Trigger
External
Trigger
Re-Trigger
5
5
Speed
Trigger Rate
Speed
Hold-off
>7.9ms
<100/s
>10.0ms
>0.5ms
>7.9ms
<100/s
>10.0ms
>0.5ms
3
DISPLAY: Dual-line vacuum fluorescent.
1st line: 20-character alphanumeric.
2nd line: 32-character alphanumeric.
REAR PANNEL CONNECTORS:
IEEE-488.
8-pin micro DIN connector for Trigger Link.
8-pin micro DIN connector for Trigger Link expansion.
Power:
100V to 240Vrms, 50/60Hz.
50VA maximum (mainframe only).
150VA maximum (mainframe with two cards at maximum closed channels).
WARRANTY: 1 year.
EMC: Complies with European Union Directive 89/336/EEC, EN61326-1.
SAFETY: Conforms to European Union Directive 73/23/EEC, EN61010-1.
OPERATING ENVIRONMENT
Maximum
Closed
Channels
7002-HD Cards
MTX1
150
MUX1
150
STORAGE ENVIRONMENT: -25°C to 65°C.
ALTITUDE: Maximum 2000m above sea level.
2
RACK MOUNT DIMENSIONS:
Configuration
Height
7002-HD
89mm
(3.5 in.)
Installed MTX1
89mm
(3.5 in.)
Installed MUX1
89mm
(3.5 in.)
WEIGHT: <5.7 kg (12.6 lb).
ACCESSORIES SUPPLIED:
Front rack-mount kit, rear rack-mount kit, line cord, and instruction manual.
ACCESSORIES AVAILABLE:
Card
7002-HD-MTX1
6x32 Differential Matrix (MTX1)
7002-HD-MUX1
Quad 1x40 Differential Multiplexer (MUX1)
7002-HD Notes
1
Display off.
2
Time from the output of a Channel Ready pulse until a new External Trigger
will be accepted on the 8-pin micro DIN connector.
3
For indoor use only
.
4
Refer to card users guide for measurement considerations.
5
External Trigger speed includes the time to output a Channel Ready pulse and
the re-trigger hold-off time.
Model 7002-HD User's Manual
General
3
4
Temperature
Humidity
0°C to 50°C
50% RH at 35°C
0°C to 50°C
50% RH at 35°C
Width
Depth
213mm
537mm
(8.375 in.)
(21.125 in.)
213mm
562mm
(8.375 in.)
(22.125 in.)
213mm
562mm
(8.375 in.)
(22.125 in.)
Description
HW
Rev. B
Page 1 of 1
11/12/2004
Advertisement
Table of Contents
