Analog Backplane; Backplane Connections; Typical Backplane; Figure 4-2 Analog Backplane (Typical) - Keithley 7002-HD User Manual

Model 7002-HD User's Manual

Analog backplane

Backplane connections

The Model 7002-HD has an analog backplane that allows the rows or multiplexers
of a Model 7002-HD series card installed in one card location to be connected to
the rows or multiplexers of a 7002-HD series card installed in the other card loca-
tion. There are a total of 32 backplane signal paths available.

Typical backplane

Figure 4-2
is connected to the backplane by closing specific relays, but the exact nature of
backplane connections will depend on the particular card. See the card manual for
details.
Figure 4-2
Analog backplane (typical)
7002-HD-MUX1 in Card 1
To Mux 1 Out and J106
To Mux 2 Out and J106
To Mux 3 Out and J110
To Mux 4 Out and J110
In A
Col
shows a simplified drawing of the analog backplane. In general, a card
Connection through
backplane of 7002-HD
J108 J109
5!17
5!18
5!19
In B In C In D 5!20
Col Col Col
4 x 8 Matrix Configuration
Return to
J108
10!17
10!18
10!19
10!20 In A In B In C
Col Col Col
Section 4 topics
Front Panel Operation
7002-HD-MUX1 in Card 2
J109
To Mux 1 Out and J106
To Mux 2 Out and J106
To Mux 3 Out and J110
To Mux 4 Out and J110
In D
Col
4-5