Table of Contents
Advertisement
Model 7002-HD User's Manual
Table 4-5 (cont.)
Scan configuration menu
Menu item
ARM-CONTROL
ARM SPACING
MANUAL
IMMEDIATE
GPIB
EXTERNAL
TRIGLINK
HOLD
ARM-COUNT
INFINITE
ENTER-ARM-COUNT
TRIGGER-CONTROL
SOURCE
ACCEPTOR
CHAN-RESTRICTIONS
SINGLE-CHAN
RESTRICTED-CHANNELS
INTERLOCK
Configure Arm Layer:
Select arm spacing control:
Use STEP key to arm scanner.
Use to arm scanner immediately.
Use a bus trigger to arm scanner.
Will be accepted, but no valid hardware exists.
Use a Trigger Link trigger to arm scanner.
Use to hold up the scan in the arm layer.
Define number of times to arm scanner:
Continuously re-arm scanner.
User defined count value (1 to 9999).
Select trigger control mode:
Enable Source Bypass.
Disable Source Bypass.
Define channel restrictions:
Enable/disable Single Channel Mode.
Designate channels that cannot be closed.
Specify up to five sets of interlocked channels.
Return to
Section 4 topics
Front Panel Operation 4-25
Description
Advertisement
Table of Contents
