Menus; Using Menus - Keithley 7002-HD User Manual

4-20 Front Panel Operation
When CLOSE is pressed with the above channel list displayed, Channels 1!1, 1!4,
2!11, and 2!36 will close.
Now assume the M10 is included in the following scan list:
SCAN CHANNELS 1!1, 1!4, M10, 1!6,
When M10 is selected in the scan, both Channels 2!11 and 2!36 will be closed at
the same time and will remain closed when channel 1!6 is scanned.
Typically, a channel pattern is used to switch in a bias supply. Once the memory
location (i.e., M10) is scanned, the closed channels in the pattern will remain
closed to supply power for the duration of the scan.

Menus

Using menus

Various instrument operations to configure the Model 7002-HD are performed
using these menus:
•
•
•
General rules for using menus:
1.
2.
3.
4.
5.
Press the MENU key to access the main menu.
Press the CARD CONFIGURATION key to configure cards.
Press the SCAN CONFIGURATION key to configure scanning.
Press the appropriate key to access the desired menu.
Pressing the EXIT key causes the display to back up to the previous menu
level. Also, keyed-in parameter changes are ignored if an EXIT is per-
formed. When the menu is displayed, pressing EXIT will disable the menu.
The position of the cursor is denoted by the blinking menu selection or
parameter. The cursor is moved from one item to the next using the cursor
keys.
A displayed arrow indicates that there is more information or additional
menu items to select from. When the right arrow is displayed, use the right
cursor key to display the additional message(s); and conversely, when the
left arrow is displayed, use the left cursor key.
A numeric parameter is keyed in by placing the cursor on the digit to be
changed, and pressing the appropriate key on the keypad.
Return to
Section 4 topics
Model 7002-HD User's Manual