Table of Contents
Advertisement
Model 7002-HD User's Manual
SCPI commands
DISPlay subsystem
The display subsystem controls the display circuitry of the Model 7002-HD and is
summarized in
Table 5-2
DISPlay command summary
Command
:DISPlay
[:WINDow[1]]
:TEXT
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:WINDow2
:TEXT
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:SMESsage <b>
:SMESsage?
:ENABle <b>
:ENABle?
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to be
included in the program message. Do not use brackets ([ ]) in the program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the pro-
gram message.
3. Upper case characters indicate the short-form version for each command word.
4. At least one space is required between a command word and the parameter.
Table
5-2.
Path to locate message to top display.
Path to control user text messages.
Define ASCII message "a" using up to 20 characters.
Query text message.
Enable (1 or ON) or disable (0 or OFF) message mode.
Query text message mode (0 or 1).
Path to locate message to bottom display.
Path to control user text messages.
Define ASCII message "a" using up to 32 characters.
Query text message.
Enable (1 or ON) or disable (0 or OFF) message mode.
Query text message mode (0 or 1).
Enable (1 or ON) or disable (0 or OFF) status message mode.
Query status message mode (0 or 1).
Turn on (1 or ON) or turn off (0 or OFF) the front panel display.
Query state of the display (0 or 1).
Return to
Section 5 topics
IEEE-488 Operation 5-11
Description
Advertisement
Table of Contents
