Keithley 7002-HD User Manual page 76

Model 7002-HD User's Manual
Table 5-5 (cont.)
STATus command summary
:STATus
:TRIGger
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:QUEStionable
[:EVENt]?
:ENABle <NRf>
:ENABle?
:PTRansition <NRf>
:PTRansition?
:NTRansition <NRf>
:NTRansition?
:CONDition?
:PRESet
:QUEue
[:NEXT]?
:ENABle <list>
:ENABle?
:DISable <list>
:DISable?
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to
be included in the program message. Do not use brackets ([ ]) in the program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the
program message.
3. Upper case characters indicate the short-form version for each command word.
4. At least one space is required between a command word and the parameter.
Command
Return to
Description
Path to control trigger event registers:
Query event register.
Program the enable register.
Query enable register.
Program the positive transition register.
Query positive transition register.
Program the negative transition register.
Query negative transition register.
Query condition register.
Path to control questionable event registers:
Query the event register.
Program the enable register.
Query the enable register.
Program the positive transition register.
Query the positive transition register.
Program the negative transition register.
Query the negative transition register.
Query the condition register.
Return status registers to default states.
Path to access error queue:
Query most recent error message.
Specify error and status messages for queue.
Query enabled messages.
Specify messages not to be placed in queue.
Query disabled messages.
Section 5 topics
IEEE-488 Operation 5-15