Keithley 7002-HD User Manual page 71

5-10 IEEE-488 Operation
Table 5-1 (cont.)
IEEE-488.2 common commands and queries
Mnemonic
*SRE <NRf> Service request
enable command
*SRE? Service request
enable query
*STB? Read status byte query
*TRG Trigger command
*TST? Self-test query
*WAI Wait-to-continue
command
Note: At least one space is required between the command and the parameter.
Name
Sets the contents of the Service Request Enable
Register.
The Model 7002-HD returns the value of the Ser-
vice Request Enable Register.
Returns the value of the Status Byte Register.
This command issues a bus trigger that has the
same effect as group execute trigger (GET) com-
mand.
When this query is sent, the Model 7002-HD will
perform a checksum test on ROM and return the
results.
Wait until all previous commands are executed.
Return to
Section 5 topics
Model 7002-HD User's Manual
Description