Table 3-1 Abbreviated Scpi Command Summary - Keithley 7002-HD User Manual

3-10 Getting Started
Table 3-1
Abbreviated SCPI command summary
Command
:SYSTem
:PRESet
[:ROUTe]
:CLOSe <list>
:STATe?
:OPEN <list>|ALL
:SCAN <list>
:POINts?
:INITiate
:ABORt
:ARM
:LAYer2
:COUNt <n>
:DELay <n>
:SOURce <name>
:TIMer <n>
:TRIGger
:COUNt <n>
:AUTo <b>
:DELay <n>
:SOURce <name>
:TIMer <n>
Notes:
1. Command shortform is indicated by the uppercase characters. For example, instead of sending ":arm:layer2:source
immediate", you can send ":arm:lay2:sour imm".
2. There must be at least one space between a command word and the parameter.
Subsystem command path.
Set scan to a default configuration.
Subsystem command path.
Path and command to close specified channels:
Request channels that are closed.
Open specified (or all) channels.
Path and command to specify channel list:
Query number of channels in scan list.
Initiate one trigger (scan) cycle.
Reset trigger system.
Subsystem command path to configure scan:
Path to program scan layer:
Program number of scans (1 to 9999, or INFinite).
Program delay (0 to 99999.999 seconds).
Select control source: HOLD, IMMediate, TIMer, MANual, BUS,
TLINk.
Set timer interval (0.001 to 99999.999 seconds).
Subsystem command path to program channel layer:
Program number of channels (1 to 9999, or INFinite).
Enable (on) or disable (off) automatic scan list count.
Program delay (0 to 99999.999 seconds).
Select control source: HOLD, IMMediate, TIMer, MANual, BUS,
TLINk.
Set timer interval (0.001 to 99999.999 seconds).
Return to
Section 3 topics
Model 7002-HD User's Manual
Description