Keithley 7002-HD User Manual page 55

4-24 Front Panel Operation
Table 4-5
Scan configuration menu
Menu item
CHAN-CONTROL
CHANNEL-SPACING
TIMER
EXTERNAL
GPIB
MANUAL
TRIGLINK
ASYNCHRONOUS
SEMI-SYNCHRONOUS
IMMEDIATE
HOLD
NUMBER-OF-CHANS
USE-SCANLIST-LENGTH
CHAN-COUNT
INFINITE
ENTER-CHAN-COUNT
CONTROL
SOURCE
ACCEPTOR
SCAN-CONTROL
SCAN-SPACING
TIMER
EXTERNAL
GPIB
MANUAL
TRIGLINK
IMMEDIATE
HOLD
NUMBER-OF-SCANS
INFINITE
ENTER-SCAN-COUNT
CONTROL
SOURCE
ACCEPTOR
Configure Channel Layer:
Select channel spacing:
Use a timer to select each channel in the scan.
Will be accepted, but no valid hardware exists.
Use a bus trigger to select each channel.
Use STEP key to select each channel.
Use a Trigger Link trigger to select each channel.
Use separate lines for In/Out triggers.
Use same line for In/Out triggers.
Use to scan channels immediately.
Use to hold up the scan in the channel layer.
Define number of channels to scan:
Count = number of channel entries in scan list.
User defined count:
Repeat channel scanning indefinitely.
Count = user defined value (1 to 9999)
Select trigger control mode:
Enable the Source Bypass.
Disable the Source Bypass.
Configure Scan Layer:
Select scan spacing:
Use the timer to control scan spacing.
Will be accepted, but no valid hardware exists.
Use bus triggers to control scan spacing.
Use STEP key to control scan spacing.
Use Trigger Link triggers to control scan spacing.
Use to pass operation immediately into the channel layer.
Use to hold up the scan in the scan layer.
Define number of scans to be performed:
Repeat scan indefinitely.
Count = user defined value (1 to 9999).
Select trigger control mode:
Enable Source Bypass.
Disable Source Bypass.
Return to
Section 4 topics
Model 7002-HD User's Manual
Description