Cisco ASR 9000 Series Command Reference Manual page 189

Tech-Support Commands
Jan 18 07:43:41.920 netflow/nfmgr 0/1/CPU0 t1 Fobj has no more references. Doing cleanup....
Jan 18 07:43:41.920 netflow/nfmgr 0/1/CPU0 t1
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
index=0,ifh=0x6000780,fmm=fmm,proto=ipv4,dir=input
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
fmon={opc=ADD,ifh=0x6000780,proto=ipv4,dir=input,fmm=fmm,fsm=smm}
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
message hw verify config FAILED. 'nfea' detected the 'warning' condition 'Requested operation
not supported'
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
fmon={opc=SKIP-OPC,ifh=0x6000780,proto=ipv4,dir=input,fmm=fmm,fsm=smm}
Jan 18 07:43:41.920 netflow/nfea 0/1/CPU0 t1
caps=10, proto=12, count=1. Cerr='ifmgr' detected the 'warning' condition 'One of the
arguments is invalid'
Jan 18 07:43:41.921 netflow/nfma 0/1/CPU0 t1
for opc=0 fmm=fmm fsm=smm proto=ipv4 dir=input on ifh=0x6000780. Cerr='nfea' detected the
'warning' condition 'Requested operation not supported'
Jan 18 07:43:41.921 netflow/nfma 0/1/CPU0 t1
count=1}
Jan 18 07:43:41.921 netflow/nfma 0/1/CPU0 t1
'warning' condition 'Requested operation not supported'
Jan 18 07:43:41.921 netflow/nfea 0/1/CPU0 t1
count=1, cmnd=2
Jan 18 07:43:41.921 netflow/nfea 0/1/CPU0 t1
dpc[0]={ifh=0x6000780,cmd=2,proto=12,caps=10}
Jan 18 07:43:41.921 netflow/nfea 0/1/CPU0 t1
caps=10, proto=12, count=1. Cerr='ifmgr' detected the 'warning' condition 'One of the
arguments is invalid'
----------- show flow trace all [09:29:25.734 UTC Mon Jan 18 2010] ------------
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support netflow
Cleaning up FMM{fmm}
Fmon limit check:
Found 0 fmons in idb
Verifying hw
Fmon verification Verify requests to batched
Verifying nfsvr msg
imp_caps_dpc_distribute() api failed for
Fmon cfg apply rejected in batched EA status
Batch dpc for {proto=ipv4, dir=input, cmnd=2,
Fmon vrfn status[1] = 'nfea' detected the
Processing dpc batch. caps=10, proto=12,
Processing
imp_caps_dpc_distribute() api failed for
183