Cisco ASR 9000 Series Command Reference Manual page 198

show tech-support performance-traffic
location
node-id
rack
rack-id
Command Default
If the location is not specified, the tech-support information is collected from all the nodes by default. If file
is specified, the command is run in the back ground and the output is compressed by default..
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The following show commands run automatically when you run the show tech-support performance-traffic
command:
• show install package all detail
• show logging
• show interfaces summary
• show interfaces brief
• show running-config
• show policymap targets type performance-traffic
• show policymgr process trace all location all
• show policy-lib trace all location all
• show afmon-lib trace client afmon_ea both location all
• show afmon-ma trace location all
• show app-obj trace location all
• show im database brief location
• show app-obj db afmon_ma_intf_db proc afmon_ma location
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
192
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Specifies a list of racks.
(Optional) Specifies the rack id.
Modification
This command was introduced.
Tech-Support Commands