Show Critmon Trace Error - Cisco ASR 9000 Series Command Reference Manual

Watchdog Commands

show critmon trace error

To display information about error traces for a critical monitor, use the show critmon trace error command
in EXEC mode and in administration EXEC mode.
show critmon trace error [file filename original] [hexdump] [last entries] [reverse] [stats] [tailf] [unique]
[verbose] [wrapping] [location {node-id| all}]
Syntax Description
file
filename
original
hexdump
last
entries
reverse
stats
tailf
unique
verbose
wrapping
location
node-id
all
Command Default
No default behavior or values
Command Modes
EXEC
Administration EXEC
(Optional) Displays a specific file.
Name of a specific file.
Specifies the original location of the file.
(Optional) Displays traces in hexadecimal format.
(Optional) Displays the last numbered entries.
Number of entries. The range is from 1 to 4294967295.
(Optional) Displays the latest traces first.
(Optional) Displays the statistics.
(Optional) Displays the new traces as they are added.
(Optional) Displays the unique entries with counts.
(Optional) Displays the information for internal debugging.
(Optional) Displays the wrapping entries in the command output.
(Optional) Specifies a node.
Node ID. The node-id argument is entered in the rack/slot/module
notation.
Specifies all locations.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show critmon trace error
299