Show Uidb Trace - Cisco ASR 9000 Series Command Reference Manual

Troubleshooting Commands

show uidb trace

To display trace data information for the micro-interface descriptor block (IDB), use the show uidb trace
command in EXEC mode.
show uidb trace {all| errors| events| init| rsm}
Syntax Description
all
errors
events
init
rsm
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
cisco-support
Examples The following example shows the sample output from the show uidb trace command:
RP/0/RSP0/CPU0:router sh uidb trace init loc 0/6/CPU0
--------------------------------------------------------------------------
28 wrapping entries (512 possible, 0 filtered, 28 total)
Mar 31 02:27:35.368 uidb_svr/initlog 0/6/CPU0 t1
Displays all UIDB trace information.
Displays information related to UIDB errors trace.
Displays information related to UIDB events trace.
Displays information related to UIDB init trace.
Displays information related to UIDB rsm trace.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
Operations
read
Entering : Event manager init
show uidb trace
37