Show Tech-Support Spaipc - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show tech-support spaipc

To automatically run show commands that display information specific to SPA Inter Process Communication
(SPAIPC) debugging, use the show tech-support spaipc command in EXEC mode
show tech-support spaipc {terminal [page]| file send-to [background] [compressed| uncompressed]}
[interface type interface-path-id] [show-only] [trace-only] [location node-id| all]
Syntax Description
file
sent-to
background
compressed
uncompressed
interface
type
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
(Optional) Collects information about a specific interface.
Interface type. For more information, use the question mark (?) online help
function.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support spaipc
271