Cisco ASR 9000 Series Command Reference Manual page 237

Tech-Support Commands
rack
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support routing bfd command to run show commands that display information specific
to BFD debugging. This command generates BFD debugging information that can be useful for Cisco Technical
Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a
Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
Note This command is not required during normal use of the router.
The following show commands run automatically when you run the show tech-support routing bfd
command:
• show bfd session
• show bfd
• show memory heap fail all
• show memory summary location all
• show process blocked location all
• show adjacency
• show bfd location
• show bfd session detail location node-id
• show bfd session agent detail location
(Optional) Displays the list of racks.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
show tech-support routing bfd
231