Show Tech-Support Routing Ospfv3 - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show tech-support routing ospfv3

To automatically run show commands that display information specific to Open Shortest Path First Version
3 (OSPFv3) debugging, use the show tech-support routing ospfv3 command in EXEC mode.
show tech-support routing ospfv3 [ instance ] [detail] {terminal [page]| file send-to [background]
[compressed| uncompressed]}
Syntax Description
instance
detail
terminal
page
file
sent-to
background
(Optional) Name of the OSPFv3 instance.
(Optional) Displays all available OSPFv3 information.
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support routing ospfv3
245