Cisco ASR 9000 Series Command Reference Manual page 278

show tech-support spaipc
interface-path-id
show-only
terminal
trace-only
location
node-id
all
page
Command Modes
EXEC
Command History
Release
Release 2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates SPAIPC debugging information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
272
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark ( ?
) online help function.
(Optional) Collects only show command information.
Displays the command output on the terminal.
(Optional) Collects only trace information.
(Optional) Specifies a node.
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Specifies all locations.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Modification
This command was introduced.
Tech-Support Commands