Show Tech-Support Platform - Cisco ASR 9000 Series Command Reference Manual

show tech-support platform

show tech-support platform
To automatically run show commands that display information specific to platforms, use the show
tech-support platform command in EXEC mode.
show tech-support platform {terminal [page] [redundancy]| file send-to| rack}
Syntax Description
terminal
page
redundancy
file
sent-to
rack
Command Default
No default behavior or values
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
198
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page of
information. If not used, the output scrolls (that is, it does not stop for page breaks).
Press the Ctrl-C keys to stop the command output.
(Optional) Displays platform redundancy related diagnostics for tech-support.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Displays the list of racks.
Tech-Support Commands