Cisco ASR 9000 Series Command Reference Manual page 212

show tech-support qos
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates QoS debugging information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
Task ID
Task ID
basic-services
cisco-support
Examples The following example shows a sample output of platform dependent QoS information of the show
tech-support routing qos command that is displayed on the terminal:
RP/0/RSP0/CPU0:router# show tech-support qos pd
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
+++++++++++++++ show version [09:10:28.558 UTC Mon Jan 18 2010] +++++++++++++++
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
206
Modification
This command was introduced.
show tech-support qos pd
Tech-Support Commands
Operations
read
read