Cisco ASR 9000 Series Command Reference Manual page 58

show tech-support
compressed
uncompressed
location
node-id
Command Default
The command output is not compressed.
Passwords and other security information are not displayed.
Command Modes
EXEC
Administration EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support command to run show commands that display system information. This
command generates information that can be useful for Cisco Technical Support representatives when
troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page
iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support command:
• show running-config
• show version
• show interfaces
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
52
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
Modification
This command was introduced.
Tech-Support Commands