Cisco ASR 9000 Series Command Reference Manual page 142

show tech-support install
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support install command to run show commands that display information specific to
installation information. This command is useful for any problems encountered while executing install
operations on the system during an install activate, install add, remove, or commit operation.This command
generates installation information that can be useful for Cisco Technical Support representatives when
troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on page
iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support install command:
• show install request
• show version
• show install active summary
• show install committed summary
• show install package all detail
• show install log verbose
• show running-config sanitize
• show redundancy
• show logging
• show platform
• show install active detail
• show install committed detail
• show install inactive detail
• show pkgfs trace location all
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
136
Modification
This command was introduced.
Tech-Support Commands