Show Tech-Support Nrs - Cisco ASR 9000 Series Command Reference Manual

show tech-support nrs

show tech-support nrs
To automatically run show commands that display information specific to the name registration service
(NRS) information, use the show tech-support nrs command in EXEC mode.
show tech-support nrs {file send-to [background| compressed| uncompressed]| terminal [page] [rack]}
Syntax Description
file
send-to
background
compressed
uncompressed
terminal
page
rack
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
184
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Specifies that the command output is displayed on the terminal.
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl+C keys to stop the command output.
(Optional) Displays the list of racks.
Tech-Support Commands