Show Tech-Support Cef - Cisco ASR 9000 Series Command Reference Manual

show tech-support cef

show tech-support cef
To automatically run show commands that display information specific to Cisco Express Forwarding (CEF)
debugging, use the show tech-support cef command in EXEC mode.
show tech-support cef [vrf vrf-name [ipv4| ipv6| mpls] [A.B.C.D| A.B.C.D/length| detail| brief| interface|
rack]] [file send-to] [compress] [location node-id] {terminal [page]| file send-to [background] [compressed|
uncompressed]}
Syntax Description
vrf
vrf-name
ipv4
ipv6
mpls
A.B.C.D
A.B.C.D/length
detail
brief
file
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
86
(Optional) Specifies a VPN routing and forwarding (VRF) instance.
(Optional) Name of a VRF.
(Optional) Specifies IPv4 CEF information.
(Optional) Specifies IPv6 CEF information.
(Optional) Specifies Multiprotocol Label Switching CEF information.
(Optional) Specifies IPv4 Prefix entries.
(Optional) Specifies IPv4 Prefix mask.
(Optional) Specifies detailed CEF debugging information.
(Optional) Specifies a brief CEF debugging information.
(Optional) Specifies that the command output is saved to a specified file.
Tech-Support Commands