Cisco ASR 9000 Series Command Reference Manual page 209

Tech-Support Commands
instance
location
node-id
all
rack
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Either a physical interface instance or a virtual interface instance as follows:
• Physical interface instance. Naming notation is rack/slot/module/port and a
slash between values is required as part of the notation.
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the modular services card or line card.
◦ module: Module number. A physical layer interface module (PLIM) is
always 0.
◦ port: Physical port number of the interface.
Note
• Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Specifies a node.
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Specifies all locations.
(Optional) Displays the list of racks.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RP0 or
RP1) and the module is CPU0. Example: interface
MgmtEth0/RP1/CPU0/0.
Modification
This command was introduced.
show tech-support ppp
203