Cisco ASR 9000 Series Command Reference Manual page 167

Tech-Support Commands
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support mpls command to run show commands that display information specific to
MPLS RSVP debugging. This command generates RSVP debugging information that can be useful for Cisco
Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting
a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support mpls rsvp command:
• show rsvp interface detail
• show rsvp counters pak
• show rsvp counters handles
• show rsvp counters database private
• show rsvp counters messages private
• show rsvp counters memory
• show rsvp counters events
• show rsvp counters notifications-client
• show rsvp counters request
• show rsvp counters destroy-reasons
• show rsvp counters policy
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
show tech-support mpls rsvp
161