show tech-support netflow
show tech-support netflow
To automatically run show commands that display information specific to netflow debugging, use the show
tech-support netflow command in EXEC mode.
show tech-support netflow file send-to [location node-id] [rack]
Syntax Description
file
send-to
location
node-id
rack
Command Modes
EXEC
Command History
Release
Release 3.9.0
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
178
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Displays the list of racks.
Modification
This command was introduced.
Tech-Support Commands