Cisco ASR 9000 Series Command Reference Manual page 262

show tech-support serial
instance
show-only
terminal
trace-only
location
node-id
all
page
Command Modes
EXEC
Command History
Release
Release 3.7.2
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
256
Either a physical interface instance or a virtual interface instance as follows:
• Physical interface instance. Naming notation is rack/slot/module/port and a
slash between values is required as part of the notation.
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the modular services card or line card.
◦ module: Module number. A physical layer interface module (PLIM) is
always 0.
◦ port: Physical port number of the interface.
Note In references to a Management Ethernet interface located on a route
processor card, the physical slot number is alphanumeric (RP0 or
RP1) and the module is CPU0. Example: interface
MgmtEth0/RP1/CPU0/0.
• Virtual interface instance. Number range varies depending on interface type.
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Collects only show command information.
Specifies that the command output is displayed on the terminal.
(Optional) Collects only trace information.
(Optional) Specifies a node.
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Specifies all locations.
(Optional) Specifies that the command output is displayed one page at a time. Use
the return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop for
page breaks).
Press the Ctrl+C keys to stop the command output.
Modification
This command was introduced.
Tech-Support Commands