Cisco ASR 9000 Series Command Reference Manual page 201

Tech-Support Commands
node-id
all
trace-only
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Tip This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support pfi command to collect information for the PFI, which consists of interface-related
date with regards to netio and interface manager. This command generates output PFI debugging information
that can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining
Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical
Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
basic-services
cisco-support
Node ID. The node-id argument is entered in the rack/slot/module notation.
Specifies all locations.
Displays only trace information.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Modification
This command was introduced.
Operations
read
read
show tech-support pfi
195