Show Tech-Support Sanitized - Cisco ASR 9000 Series Command Reference Manual

Tech-Support Commands

show tech-support sanitized

To automatically run show commands that display information specific to sanitized configuration output,
use the show tech-support sanitized command in EXEC mode.
show tech-support sanitized {terminal [page]| file send-to [background] [compressed| uncompressed]}
[location node-id| all] [rack]
Syntax Description
terminal
page
file
sent-to
background
compressed
uncompressed
Displays the command output on the terminal.
(Optional) Displays the command output on a single page at a time. Use the
Return key to display the next line of output or use the space bar to display the
next page of information. If not used, the output scrolls (that is, it does not stop
for page breaks).
Press the Ctrl-C keys to stop the command output.
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
show tech-support sanitized
259