Figure 41: Connecting The Ac Power Cord To The Switch; Figure 42: Lowering The Power Cord Retaining Clip - Allied Telesis AT-x550-18XTQ Installation Manual

Chapter 6: Verifying the Status of the Switches
88
2. Connect the AC power cord to the AC power connector on the rear
panel of the switch. Refer to Figure 41.
Figure 41. Connecting the AC Power Cord to the Switch
3. Lower the power cord retaining clip to secure the cord to the switch.
Refer to Figure 42.
Figure 42. Lowering the Power Cord Retaining Clip