Figure 36: Installing The Wall Brackets - Allied Telesis AT-x550-18XTQ Installation Manual

Figure 36. Installing the Wall Brackets
3. After attaching the brackets to the side of the switch, have another
person hold the switch on the plywood base on the wall while you
secure it with the four M4x32.3mm screws included with the switch.
Refer to Figure 37 on page 80.
Please follow these guidelines as you position the switch on the wall:
 Position the switch so that the front panel is either on the left or
right. Refer to Figure 36. You may not install the switch with the
front panel facing up or down.
 Leave sufficient space from other devices or walls so that you can
access the front and back panels.
x550 Series Installation Guide for Virtual Chassis Stacking
79