Figure 56: Sliding The At-Qsfpcu Cable Into Slot 17; Figure 57: Removing The Dust Cover From Slot 21 - Allied Telesis AT-x550-18XTQ Installation Manual

Chapter 7: Installing the Stacking QSFP+ Transceivers
102
Release Tab
Figure 56. Sliding the AT-QSFPCU Cable into Slot 17
3. Remove the dust cover from slot 21 on the other x550 Switch to be in
the stack. Refer to Figure 57.
Figure 57. Removing the Dust Cover from Slot 21
4. Orient the transceiver with the release tab on the bottom and slid it into
the QSFP+ slot until it clicks into place. Refer to Figure 58 on page
103.