Dentsply Sirona - Dentsply Sirona inFire HTC speed Operating Instructions Manual

Hide thumbs Also See for inFire HTC speed:
Table of Contents

Advertisement

3 Safety information
Note on the prevention, recognition and
elimination of unintended
electromagnetic effects
10
WARNING
Risk of burns due to hot surfaces
The inFire HTC speed high-temperature furnace may develop hot
surfaces in some areas after extended use. Use the necessary caution
around the unit, especially when the furnace is operated for extended
periods.
➢ Never touch the hot surfaces.
WARNING
Risk of burns due to hot surfaces
Once the program has ended and the furnace has shut down, the
cooling fan will run until the interior temperature of the furnace has been
reduced to normal. The power plug may not be disconnected prior to this
point.
WARNING
Fire hazard due to covering ventilation slots on the upper side of the
casing
Covered ventilation slots can overheat the furnace and cause the object
placed on top to ignite.
➢ Do not place any objects on the casing upper side.
This device is a piece of electrical equipment with a supply voltage below
1000 VAC and is intended for commercial use. It is to be installed in
dental laboratories or other areas with a controlled electromagnetic
environment. The applicable EMC requirements comply with EN
61326:2006.

Dentsply Sirona

Operating Instructions inFire HTC speed
61 30 459 D 3497
D 3497.201.01.19.02 09.2017

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents