Safety Information - Dentsply Sirona inFire HTC speed Operating Instructions Manual

3 Safety information
8
3

Safety information

Perform connection by following the directions given in the present
operating instructions.
As manufacturers of dental and laboratory equipment and in the interest
of the operational safety of your system, we stress the importance of
having maintenance and repairs performed exclusively by our own
personnel or through our authorized representatives. Furthermore,
safety-critical system components must always be replaced with original
spare parts.
We suggest that you request a certificate specifying the nature and extent
of the work performed from the persons who performed it. Furthermore,
the certificate should also include any possible changes in rated
parameters or working ranges as well as the date, the name of the firm
and a signature.
Modifications to this system which may affect the safety of the operator or
third parties are prohibited by law.
For reasons of product safety, this product may be operated only with
original Sirona accessories or third-party accessories expressly approved
by Sirona. The user is responsible for any damage resulting from the use
of non-approved accessories.
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
CAUTION
Liability exclusion for any other use
The inFire HTC speed high-temperature furnace is exclusively intended
for sintering oxide ceramics for use in dental technology. We are not
liable for damages due to any other use.
The inFire HTC speed high-temperature furnace with integrated gas
management system and associated accessories enable the sintering
of pre-sintered non-precious metals.
CAUTION
Risk due to improper operation
The inFire HTC speed high-temperature furnace may only be operated
by employees who are familiar with the content of these operating
instructions. Signs and labels on the laboratory furnace must be kept in
legible condition at all times. They may not be removed.
Dentsply Sirona
Operating Instructions inFire HTC speed
61 30 459 D 3497
D 3497.201.01.19.02 09.2017