Storing Program Values - Dentsply Sirona inFire HTC speed Operating Instructions Manual

Dentsply Sirona
Operating Instructions inFire HTC speed
Explanation
Call method
Entering a program title (optional)
Save
61 30 459 D 3497
D 3497.201.01.19.02 09.2017
6.6.6.4

Storing program values

This section describes the procedure for storing changed program values
of freely programmable settings (20-30).
✔
Once program values have been entered with the keys S1 to S4, they
can be saved.
➢ Press the Memory key.
 The LCD displays shows the following menu:
Program titles can be entered on the left side of the display in four lines
(the cursor flashes at the entry position).
Moving the cursor
Use the "S4" key to move the cursor one space to the right.
Numeric entry
Use the numeric keys (0-9) for entering numbers.
Text entry
Repeatedly pressing function key "F" displays the letters of the alphabet
in succession.
Once the desired letter is reached, press the "S4" key to insert this letter
in the display.
Deleting a character
You can delete characters by entering a blank space.
Once you have reached the blank space, press "S4" to insert it.
1. Press the "S4" key until you reach the character you want to delete.
2. Press function key "F" until the blank space appears (it comes after
the letter "Z").
3. Press the "S4" key.
 The character has been deleted and the cursor has now moved one
space to the right.
➢ Press the "S2" key (=YES).
The program is stored under the number that was used for loading (e.g.
13).
To quit the menu immediately, press the "S1" key (=NO). The standby
screen is shown.
6 Operation
6.6 Programs
43