Loading The Furnace With The Incoris Cc Set, From Serial Number - Dentsply Sirona inFire HTC speed Operating Instructions Manual

Dentsply Sirona
Operating Instructions inFire HTC speed
61 30 459 D 3497
D 3497.201.01.19.02 09.2017
6. Remove the sintering tray after the furnace has cooled down.
or
Remove the sintering tray using commercial crucible and
➢
investment tongs.
Tip: From serial number 5000, the sintering bell can be removed using the
supplied crucible fork.
6.5.6 Loading the furnace with the inCoris CC set, from serial
number >5000
1. Place the base plate on the upper door insulation brick.
2. Position the sintering tray with the cover centrally on the base plate.
6.5 Non-precious metal (NPM) sintering (optional)
6 Operation
35