6 Operation
6.5 Non-precious metal (NPM) sintering (optional)
30
6.4.3
Classic sintering (program starts at room temperature, no
pre-heating required)
Classic sintering refers to the conventional long-term sintering process,
which does not require the furnace to be pre-heated. Stacking a
maximum of two sintering trays is permitted. The procedure is identical to
speed sintering.
6.5
Non-precious metal (NPM) sintering (optional)
6.5.1
Safety instructions
6.5.1.1
Basic information
WARNING
All safety instructions contained in the operating instructions for the
standard device apply as a basic rule.
The safety instructions from the following sources apply to the use of
argon as a fuel:
– Safety data sheet from the manufacturer (e.g. Air Liquide)
– TRGS 510 (Technical Rule for Hazardous Substances) "Storage of
hazardous substances in non-stationary containers", October 2010
edition
Dentsply Sirona
Operating Instructions inFire HTC speed
61 30 459 D 3497
D 3497.201.01.19.02 09.2017