2. Tools, Maintenance Schedules, Procedures and Testing
Combined Temperature and Pressure Meter
Heise PTE-1 Handheld LCD digital calibrator complete with temperature and pressure
modules, and PT100 probe as follows:
Meter (without data logging capabilities) — PTEC = X X 4 4A
Pressure Module — HQS2 B A A 400 kPa A
Temperature Module — HQS RT1 PT-100
RTD Probe Pt-100 — PT5
Notes:
These product references are very specific, and the local supplier of Heise equipment
(see www.heise.com) should be consulted prior to confirming order codes.
The meter above is of the non data logging variety. If data logging is required, please
consult order code variations from Heise data sheet.
The above probe is 3.2mm (1/8in) diameter.
STAT IM 2000/2000S
STATIM 2000/2000S/2000 G4 Service Guide
Service Guide
96-108639 Rev 3.0
Figure 6
Page 19