SciCan STATIM 2000 Service Manual page 10

1. Identifying STAT IM 2000 Units
Software Versions and Corresponding Calibration Procedures
Model Approx.
Year of
Manufacture
1000 1992 - 1995
2000 1992 - 1995
2000 1995 - 2005
2000 2005 - 2007
2000
2007
2000
2010
G4
2000S 1995 - 2004
2000S 2004 - 2005
2000S 2005 - 2007
2000S 2007
2000S
2010
G4
Identifying Controller Board Types
There are four different types of Controller Boards that may be encountered in STAT IM 2000/2000S/2000 G4
type units (See 'PCB revision' above). They can be identified as below (Figure 3):
Figure 3
Revision 3.x/4.x type board (1992 – 1995):
Page 8
Software Steam PCB
Revision generator Revision
Type
N/A Aluminium 3.x/4.x
Internal
N/A Aluminium 3.x/4.x
Internal
S2O2R1xx Aluminium 2.x/5.x
S2O2R2xx Internal
S2O2R5xx Aluminium 6.x
External
S2O2R6xx Aluminium 7.x
External
S202R7xx Aluminium 7.x
External
S2S2R1xx Aluminium 2.x/5.x
S2S2R2xx Internal
S2S2R4xx Stainless 6.x
Steel
S2S2R5xx Aluminium 6.x
External
S2S2R6xx Aluminium 7.x
External
S2S2R7xx Aluminium 7.x
External
STAT IM 2000/2000S
Pump Compressor Pressure
transducer
N/A N/A
N/A
N/A
N/A
N/A
N/A
(60 p.s.i.)
(68p.s.i.)
(68p.s.i.)
(68p.s.i.)
(68p.s.i.)
Typical features:
Revision number bottom right hand side.
Single, rectangular microprocessor.
STATIM 2000/2000S/2000 G4 Service Guide
96-108639 Rev 3.0
Validation Calibration
thermocouple procedure
N/A 1
N/A 1
N/A 2
3
4
8
N/A 5
N/A 6
N/A 6
N/A 7
N/A 9
Service Guide