Netstat - Dell iDRAC6 User Manual

Supported Interfaces
• Remote RACADM
• telnet/ssh RACADM

netstat

NOTE:
To use this command, you must have Execute Diagnostic Commands
permission.
Table A-46 describes the netstat subcommand.
Table A-46. netstat
Subcommand
netstat
Synopsis
racadm netstat
Supported Interfaces
• Remote RACADM
• telnet/ssh RACADM
ping
NOTE:
To use this command, you must have Execute Diagnostic Commands or
Configure iDRAC6 permission.
Table A-47 describes the ping subcommand.
Table A-47. ping
Subcommand Definition
ping
376
RACADM Subcommand Overview
Definition
Displays the routing table and the current connections.
Verifies that the destination IP address is reachable from iDRAC6
with the current routing-table contents. A destination IP address is
required. An ICMP echo packet is sent to the destination IP address
based on the current routing-table contents.