Dell iDRAC6 User Manual page 157

Most common issues are explained in this section. However, in general,
you should check the following:
1 Ensure that you use the correct user domain name during a log in and not
the NetBIOS name.
2 If you have a local iDRAC6 user account, log in to iDRAC6 using your
local credentials.
3 Check the following settings:
Navigate to the Active Directory Configuration and Management
a
screen. Select System→ Remote Access→ iDRAC6, click the
Network/Security tab, and then click the Active Directory subtab.
Ensure that the Active Directory Enabled check box is selected in the
b
Step 2 of 4 Active Directory Configuration and Management page.
If you have enabled certificate validation, ensure that you have
c
uploaded the correct Active Directory root CA certificate to iDRAC6.
The certificate appears in the Current Active Directory CA
Certificate area. Ensure that iDRAC6 time is within the valid period
of the CA certificate.
If you are using the Extended Schema, ensure that iDRAC6 Name
d
and iDRAC6 Domain Name match your Active Directory
environment configuration.
If you are using the Standard Schema, ensure that the Group Name
and Group Domain match your Active Directory configuration.
Navigate to the Network screen. Select System→ Remote Access→
e
iDRAC6→ Network/Security→ Network.
Ensure that the DNS settings are correct.
Check the Domain Controller SSL certificates to ensure that iDRAC6
f
time is within the valid period of the certificate.
Using iDRAC6 With Microsoft Active Directory
157