Dell iDRAC6 User Manual page 318

Table 20-8. Server Status Screen (continued)
Severity
Critical
Critical
Critical
Critical
Critical
Critical
Critical
Critical
Critical
318
Recovering and Troubleshooting the Managed System
Message
System Board Video Riser:
Module sensor for System Board,
device removed was asserted
Mezz B<slot number> Status:
Add-in Card sensor for Mezz
B<slot number>, install error
was asserted
Mezz C<slot number> Status:
Add-in Card sensor for Mezz
C<slot number>, install error
was asserted
Backplane Drive <number>:
Drive Slot sensor for Backplane,
drive removed
Backplane Drive <number>:
Drive Slot sensor for Backplane,
drive fault was asserted
System Board PFault Fail Safe:
Voltage sensor for System Board,
state asserted was asserted
System Board OS Watchdog:
Watchdog sensor for System
Board, timer expired was asserted
System Board OS Watchdog:
Watchdog sensor for System
Board, reboot was asserted
System Board OS Watchdog:
Watchdog sensor for System
Board, power off was asserted
Cause
Required module was removed
Incorrect Mezzanine card
installed for IO fabric
Incorrect Mezzanine card
installed for I/O fabric
Storage drive was removed
Storage drive failed
This event is generated when
the system board voltages are
not at normal levels
iDRAC6 watchdog timer
expired and no action is set
iDRAC6 watchdog detected
that the system has crashed
(timer expired because no
response was received from
Host) and the action is set to
reboot
iDRAC6 watchdog detected
that the system has crashed
(timer expired because no
response was received from
Host) and the action is set to
power off