Configuring Ipmi Over Lan - Dell iDRAC6 User Manual

To add an additional email alert destination, repeat step a through
e
step d. You may specify up to four email alert destinations.

Configuring IPMI Over LAN

1 Log in to iDRAC6 Web interface.
2 Configure IPMI over LAN:
Click System→ Remote Access→ iDRAC6, and then click the
a
Network/Security tab.
The Network screen appears.
Click IPMI Settings.
b
Select the Enable IPMI Over LAN check box.
c
Update the Channel Privilege Level Limit, if required:
d
NOTE:
from the IPMI over LAN interface. For more information, see the IPMI 2.0
specifications.
Under IPMI Settings, click the Channel Privilege Level Limit drop-
down menu, select Administrator, Operator, or User, and then click
Apply.
Set the IPMI LAN channel encryption key, if required.
e
NOTE:
Under IPMI Settings in the Encryption Key field, enter the
encryption key.
Click Apply.
f
3 Configure IPMI Serial over LAN (SOL):
Click System→ Remote Access→ iDRAC6, and then click the
a
Network/Security tab.
The Network screen appears.
Click the Serial Over LAN tab.
b
Select Enable Serial Over LAN.
c
Update the IPMI SOL Baud Rate, if needed, by selecting a data speed
d
from the Baud Rate drop-down menu.
This setting determines the IPMI commands that can be executed
iDRAC6 IPMI supports the RMCP+ protocol.
Configuring iDRAC6 Enterprise Using the Web Interface
97