Dell iDRAC6 User Manual page 256

Configuring E-mail Alerts
1 Enable global alerts by entering the following command:
racadm config -g cfgIpmiLan -o
cfgIpmiLanAlertEnable 1
2 Enable e-mail alerts by entering the following commands:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable -i < index > <0|1>
where <index> is the e-mail destination index and 0 disables the e-mail
alert or 1 enables the alert. The e-mail destination index can be a value
from 1 through 4.
For example, to enable e-mail with index 4, enter the following command:
racadm config -g cfgEmailAlert -o
cfgEmailAlertEnable -i 4 1
3 Configure your e-mail settings by entering the following command:
racadm config -g cfgEmailAlert -o
cfgEmailAlertAddress -i 1 <email-address>
where 1 is the e-mail destination index and <email-address> is the
destination e-mail address that receives the platform event alerts.
4 To configure the SMTP e–mail server, enter the following command:
racadm config -g cfgRemoteHosts -o
cfgRhostsSmtpServerIpAddr < SMTP E-mail Server IP
Address >
5 To configure a custom message, enter the following command:
racadm config -g cfgEmailAlert -o
cfgEmailAlertCustomMsg -i < index > <custom-message>
where <index> is the e-mail destination index and <custom-message> is
the custom message.
6 Test the configured e-mail alert, if desired, by entering the following
command:
racadm testemail -i < index >
where <index> is the e-mail destination index to test.
256
Using the RACADM Command Line Interface