Configuring Platform Events - Dell iDRAC6 User Manual

Table 5-7. Network Security Buttons (continued)
Button
Apply
Go Back to
Network
Configuration Page

Configuring Platform Events

Platform event configuration provides a mechanism for configuring iDRAC6
to perform selected actions on certain event messages. The actions include no
action, reboot system, power cycle system, power off system, and generate an
alert (Platform Event Trap [PET] and/or e-mail).
The filterable platform events are listed in Table 5-8.
.
Table 5-8. Filterable Platform Events
Index Platform Event
1 Battery Probe Warning
2 Battery Probe Failure
3 Discrete Voltage Probe Failure
4 Temperature Probe Warning
5 Temperature Probe Failure
6 Processor Failure
7 Processor Absent
8 Hardware Log Failure
9 Automatic System Recovery
When a platform event occurs (for example, a Battery Probe Warning),
a system event is generated and recorded in the System Event Log (SEL).
If this event matches a platform event filter (PEF) that is enabled and you
have configured the filter to generate an alert (PET or e-mail), then a PET or
e-mail alert is sent to one or more configured destinations.
94
Configuring iDRAC6 Enterprise Using the Web Interface
Description
Saves any new settings that you made to the Network
Security screen.
Returns to the Network screen.